Fix a Combination Lock of a RELIABILT Waterproof Combination Lock Wall Mount Lock Box

Overview: This repair guide will walk you through the process of fixing or resetting the combination lock on a RELIABILT Waterproof Combination lock Wall mount lock box. The repair entails either resetting the combination or replacing the lock mechanism. The estimated time required to complete the repair is approximately 15-30 minutes. The skill level needed is intermediate, and prior knowledge of combination locks is helpful. A clean workspace and a dry environment are recommended. The expected outcome is a fully functional lock box with a known combination.

Tools Required:

• A small screwdriver (flathead or Phillips)

• Optional: Replacement lock mechanism (if the existing one is faulty)

• Optional: A paperclip or similar tool for manual reset (if applicable)

Step-by-Step Repair Guide:

• Inspect the Lock: Examine the lock box for any visible screws or clips that may need to be removed to access the internal mechanism. Ensure the workspace is clear and dry.

• Remove the Back Cover: Use a small screwdriver to carefully remove the screws holding the back cover of the lock box in place. Gently pry the cover off if it does not come off easily.

• Locate the Reset Button: Inside, look for a small reset button or switch near the combination dials. This is usually found on the back of the lock mechanism.

• Reset the Combination: If a reset button is found, press and hold it while entering a new combination using the dials. Release the button to confirm the new combination.

• Test the New Combination: Once a new combination is set, reattach the back cover and test the lock with the new combination to ensure it works correctly.

• Reassemble: If the repair involves replacing parts, ensure all components are securely fastened and the lock functions smoothly.

Estimated Cost:

• Cost of replacement parts (if needed): $10-$30

• Cost of tools (if not commonly owned): $5-$10

• Approximate labor cost if hiring a professional: $20-$50

Tips and Warnings:

• Tip: Write down your new combination and store it in a safe place to avoid future issues.

• Warning: Ensure the lock box is installed in a secure location to prevent unauthorized access.

• Caution: Avoid using excessive force when handling the lock mechanism to prevent further damage.